Automation

  • FLC 200D2Y00

    Category: Specialized
    • through beam sensor
    • -30 … 70 °C
  • FlexFlow PF20H

    Category: Flow Measurement
    • SIP- capable without restrictions up to 150 °C / 24h
    • Broad portfolio of process connections
    • Flow and temperature measurement in a single sensor
    • Compact and robust
    • Available with IO-Link interface
  • FlexFlow PF20S

    Category: Flow Measurement
    • Parallel measurement of flow and temperature
    • Flow measurement independent of the mounting position
    • Large measuring range up to 400 cm/s
    • Measurement at high media temperatures up to 125 °C
    • High pressure resistance up to 100 bar
    • One-piece, compact measuring probe
    • Calibrated linear analog outputs for flow and temperature
    • IO-Link interface combined with analogue or switching output (programmable)
  • FlexProgrammer 9701

    Category: Interfaces
    • Operated from a PC, supplied from the USB port
    • Remote operation, supplied from a battery
    • User-friendly software with help menus
    • Configures the following products: Pxxx-series,CPX-series,FlexView,FlexBar 3431,FlexBar HRT,FlexTop 2201,FlexTop 2202,FlexTop 2203,FlexTop 2204,FlexTop 2211,FlexTop 2221,FlexTemp 2301,FlexTemp 2311,FlexTemp 2321,Level Switch LFFS + LBFS,TE2 with integrated transmitter,Combi-Series
  • FlexTemp 2301

    Category: Transmitter
    • 4…20 mA transmitter for Pt100 sensors
    • 2-, 3- or 4-wire sensors
    • Accuracy better than 0.25°C
    • Sensor offset correction
    • Automatic/confi gurable cable resistance compensation (2-wire)
    • Sensor error detection
    • 2-way confi guration (Windows)
    • Confi gurable damping and status indication
    • Engineering unit °C or °F
    • PC datalogging
  • FlexTemp 2311

    Category: Transmitter
    • 4…20 mA transmitter
    • RTD, T/C, mV and R inputs
    • Isolation voltage 2 kVac
    • Configuration via FlexProgrammer
    • Accuracy better than 0.1°C (Pt100)
    • Configurable linearisation, damping and status indication
    • Local, remote or fixed compensation for “cold junction” (CJC)
  • FlexTemp 2321

    Category: Transmitter
    • 4…20 mA transmitter with HART® communication.
    • RTD, T/C, mV and R inputs
    • Isolation voltage 2 kVac
    • Confi guration via FlexProgrammer or HART® confi gurator
    • Accuracy < 0.1°C (Pt100)
    • Confi gurable linearisation, damping and status indication
    • Current-trim and sensor-trim
    • Local, remote or fi xed compensation for “cold junction” (CJC)
  • FlexTop 2202

    Category: Transmitter
    • 4…20 mA transmitter for Pt100 sensors
    • 2-, 3- or 4-wire sensors
    • Accuracy better than 0.25°C
    • Sensor offset correction
    • Automatic/configurable cable resistance compensation (2-wire)
    • Sensor error detection
    • 2-way configuration
    • Configurable damping and status indication
    • Engineering unit °C or °F
    • PC datalogging
    • Excellent temperature stability
    • Ex ia IIC T5/T6, ATEX II 1G
  • FlexTop 2203

    Category: Transmitter
    • 4…20 mA transmitter for T/C sensors
    • Sensors type B, J, K, N and S
    • Accuracy 4…5°C
    • Sensor error detection
    • Compensation for “cold junction” (CJC) Internal, external and fi xed.
    • 2-way confi guration
    • Confi gurable damping and status indication
    • Engineering unit °C or °F
    • PC datalogging
    • Excellent temperature stability
    • Ex ia IIC T5/T6, ATEX II 1G
  • FlexTop 2204

    Category: Transmitter
    • 4…20 mA transmitter for Pt500 sensors and Resistance input
    • 2-, 3- or 4-wire sensors
    • Accuracy better than 0.25°C (Pt500)
    • Sensor offset correction
    • Automatic/configurable cable resistance compensation (2-wire)
    • Sensor error detection
    • 2-way configuration
    • Configurable damping and status indication
    • Engineering unit °C or °F
    • PC datalogging
    • Excellent temperature stability
    • Ex ia IIC T5/T6, ATEX II 1G
    • Ex nA II T5, ATEX II 3G
  • FlexTop 2211

    Category: Transmitter
    • For RTD (resistance) or T/C (thermocouple)
    • Input: RTD, T/C, mV and ohm
    • Measuring range -270 … +2300 °C
    • More accurate than 0.1 °C for Pt100
    • ATEX explosion protection
    • DIN form B housing installation
  • FlexTop 2211

    Category: Transmitter
    • 4…20 mA transmitter
    • RTD, T/C, mV and R inputs
    • Isolation voltage 3.75 kVac
    • Configuration via FlexProgrammer
    • Accuracy better than 0.1°C (Pt100)
    • Configurable linearisation, damping and status indication
    • Local, remote or fixed compensation for “cold junction” (CJC)
    • Ex approvals: Ex ia IIC T5/T6, ATEX II 1G, Ex nA II T5, ATEX II 3G
  • FlexTop 2212

    Category: Transmitter
    • Programmable through integrated USB port
    • Sensor calibration for either offset, slope or polynomial adjustment
    • Accuracy better than 0.1°C for RTD elements
    • Automatic cable compensation calibration (2-wire)
    • Fast sampling time < 50 ms
    • Isolation voltage 1.5 kVAC
    • IECEx / ATEX pending
  • FlexTop 2221

    Category: Transmitter
    • 4…20 mA transmitter with HART® communication.
    • RTD, T/C, mV and R inputs
    • Isolation voltage 3.75 kVac
    • Configuration via FlexProgrammer or HART® configurator
    • Accuracy < 0.1°C (Pt100)
    • Configurable linearisation, damping and status indication
    • Current-trim and sensor-trim
    • Local, remote or fixed compensation for “cold junction” (CJC)
    • Ex approvals: Ex ia IIC T5/T6, ATEX II 1G ,Ex nA II T5, ATEX II 3G
  • FlexTop 2222

    Category: Transmitter
    • Universal transmitter with HART® communication
    • Programmable through integrated USB port or HART® modem
    • Sensor calibration for either offset, slope or polynomial adjustment
    • Accuracy better than 0.1°C for RTD elements
    • Automatic cable compensation calibration (2-wire)
    • Fast sampling time < 50 ms
    • Isolation voltage 1.5 kVAC
    • IECEx / ATEX pending
  • FPAM 18N3151

    Category: Cylindrical Sensor
    • retro-reflective sensor
    • 3,2 m
    • pulsed red LED
    • NPN
    • no
    • cable 3 pin, 2 m
    • -25 … 55 °C
    • IP 67
  • FSE 025B2002

    Category: Minituarized
    • through beam sensor
    • -25 … 70 °C
  • FSE 100F6Y01

    Category: Square Fiber
    • through beam sensor
    • -30 … 70 °C
  • FVDK 10N5101

    Category: Plastic Fiber
    • pulsed red LED
    • NPN
    • potentiometer, 270°
    • cable, 2 m
    • -25 … 55 °C
    • IP 40
  • FVDM 15N5103

    Category: Glass Fiber
    • 240 mm
    • 1200 mm
    • pulsed infrared diode
    • NPN
    • potentiometer, 20 turn
    • cable 4 pin, 2 m
    • -25 … 65 °C
    • IP 65
  • GAM900

    Category: Vibration Sensor
    • Acceleration sensor / analog / CANopen®
    • Up to two relay outputs for limit monitoring
    • 3 axes detection, MEMS based
    • Measuring range ±2 g
    • Connection: connector M12, 12-pin
    • Offshore capability (plastic housing)
  • GE333

    Category: Corrosive Enviroment
    • Encoder with through hollow shaft ø12 mm
    • Stainless steel design
    • Optical sensing method
    • Max. 6000 pulses per revolution
    • Clamping ring on housing
    • Operating temperature -25…+100 °C (5 VDC)
  • GIM140R – 1-dimensional, analog

    Category: Inclination
    • Size 48 mm
    • Interface Analog
    • MEMS capacitive measuring principle
    • Measuring range 1-dimensional: 0…360°
    • Aluminium housingn
    • Protection IP 67/IP 69K
    • Connection cable
    • Teach input for adjustment of zero position
  • GM400

    Category: 58mm IntegratedCorrosive Proof
    • Encoder multiturn / SSI
    • Optical sensing method
    • Resolution: max. singleturn 14 bit, multiturn 16 bit
    • Clamping flange
    • Electronic setting of zero point
    • Counting direction input
    • Available with additional incremental output
    • Maximum resistant against magnetic fields
  • GM400

    Category: 58mm IntegratedCorrosive Proof
    • Encoder multiturn / SSI
    • Optical sensing method
    • Resolution: max. singleturn 14 bit, multiturn 16 bit
    • Clamping flange
    • Electronic setting of zero point
    • Counting direction input
    • Available with additional incremental output
    • Maximum resistant against magnetic fields
  • GMM236S

    Category: Motion
    • SIL3 and PLe certification
    • Monitoring of underspeed, overspeed, standstill and rotating direction
    • Inputs for HTL/RS422/SinCos encoders and sensors
    • Safety related outputs
    • Mounting to 35 mm DIN rail (according to EN 60715)
    • USB interface for simple parametrization by the OS 6.0 operator surface
  • GXN1H

    Category: Large Hollow
    • Encoder multiturn / parallel
    • Optical sensing method
    • Resolution: singleturn 12 bit, multiturn 12 bit
    • Through hollow shaft ø14 mm
    • 250 cams freely programmable
    • 16 parallel outputs
    • Encoder programming by Windows software
    • RS232 encoder programming interface
    • Electronic setting to preset
  • GXN1H

    Category: Large Hollow
    • Encoder multiturn / parallel
    • Optical sensing method
    • Resolution: singleturn 12 bit, multiturn 12 bit
    • Through hollow shaft ø14 mm
    • 250 cams freely programmable
    • 16 parallel outputs
    • Encoder programming by Windows software
    • RS232 encoder programming interface
    • Electronic setting to preset
  • H 126

    Category: Mechanical
    • Stroke counter
    • Adding
    • Display 5-digits
    • Manual reset by knurled knob
  • HDmag flex MIR 3000F

    Category: High Resolution Magnestic Belt
    • Encoder without bearings – incremental with magnetic sensing
    • Flexible design for wide shaft diameter range
    • Square-wave signals HTL/TTL or sine signals
    • Max. 131072 pulses per revolution
    • Status indication via system OK output and LED
    • Robust and wearless
    • Fully encapsulated electronics IP 67
    • Large mounting tolerances
  • HG 16

    Category: High Speed Version
    • Large axial and radial displacement of the shaft permitted
    • Fit for high operating speed
    • Robust and wearless
    • Max. 2048 pulses per revolution
    • Logic level TTL with regulator UB 9…26 VDC
  • HMG 161

    Category: Large Hollow Shaft
    • Multiturn / SSI / Profibus / CANopen® / DeviceNet
    • Optical sensing method
    • Singleturn 13 bit, multiturn 12 bit / 16 bit
    • Through hollow shaft ø38…70 mm
    • Multiturn sensing with microGen technologie, without gear or battery
    • Special protection against corrosion
  • HMG10-B – CANopen®

    Category: HMG 10HMG ProgrammableHMG Series
    • Interface CANopen®
    • Magnetic sensing method
    • Resolution: singleturn 13 bit, multiturn 16 bit
    • Function display via LEDs
    • Multiturn sensing with Energy Harvesting technology, without gear or battery
    • Two-sided bearing system with hybrid bearings
    • Special protection against corrosion C5-M
  • HMG10-B EtherCAT

    Category: HMG 10HMG ProgrammableHMG Series
    • Interface EtherCAT
    • Magnetic sensing method
    • Resolution: singleturn 13 bit, multiturn 16 bit
    • Function display via LEDs
    • Multiturn sensing with Energy Harvesting technology, without gear or battery
    • Two-sided bearing system with hybrid bearings
    • Special protection against corrosion C5-M
  • HMG10-B EtherCAT

    Category: HMG 10HMG ProgrammableHMG Series
    • Interface EtherCAT
    • Magnetic sensing method
    • Resolution: singleturn 13 bit, multiturn 16 bit
    • Function display via LEDs
    • Multiturn sensing with Energy Harvesting technology, without gear or battery
    • Two-sided bearing system with hybrid bearings
    • Special protection against corrosion C5-M
  • HMG10P-B – CANopen®

    Category: HMG 10HMG ProgrammableHMG Series
    • Interface CANopen®
    • Magnetic sensing method
    • Resolution: singleturn 13 bit, multiturn 16 bit
    • Function display via LEDs
    • Multiturn sensing with Energy Harvesting technology, without gear or battery
    • Two-sided bearing system with hybrid bearings
    • Special protection against corrosion C5-M
  • HOG 10

    Category: HOG Series
    • TTL output driver for cable length up to 550 m
    • Very high resistance to shock and vibrations
    • Hybrid bearing for extended service life
    • Large terminal box, turn by 180° or axial terminal cover
  • HOG 161

    Category: Large Hollow
    • Robust light-metal housing
    • Through hollow shaft up to ø75 mm
    • Output stage HTL or TTL
    • Output stage TTL with regulator UB 9…26 VDC
    • Special protection against corrosion
    • Large terminal box, turn by 180°
  • HOG 86

    Category: EX SeriesStandard Type
    • Robust, compact housing
    • Two bearings with large distance, one at each end
    • High shaft load up to 450 N
    • Shaft insulation up to 2.8 kV
    • Highest operating speed 10000 rpm
    • Terminal box, turn by 180°
  • HOG 86 + DSL

    Category: Incremental Encoder -Combination
    • Robust, compact housing
    • Hybrid bearing for extended service life
    • 3 switching outputs speed controlled (independent transistor outputs)
    • Freely programmable on and off switching speed
    • Programming via included software (RS485 interface)
    • Output stage HTL or TTL
  • HOG 86 M

    Category: Complete Profolio Hollow
    • Robust, compact housing
    • Two bearings with large distance, one at each end
    • High shaft load up to 450 N
    • Shaft insulation up to 2.8 kV
    • Highest operating speed 10000 rpm
    • Terminal boxes, turn by 180°
    • Redundant sensing
  • HOG 9 G

    Category: Twin Encoder Incremental
    • Twin encoder featuring two separate systems
    • TTL output driver for cable length up to 550 m
    • Hybrid bearing for extended service life
  • HOGS 100 S

    Category: Corrosive Series
    • For safety-relevant applications according SIL2
    • Blind hollow shaft ø16 mm or cone shaft ø17 mm (1:10)
    • Up to 5000 sinewaves cycles per turn
    • Low harmonic content (patented LowHarmonics technology)
    • Top-quality SinCos output-signals
    • Protection against inductive shaft current
    • Large terminal box, turn by 180° or axial terminal cover
  • HOKUYO BWF – Serial Type High Performance Optical Data Transmission Device

    Category: Optical Data Transmission

    The BWF Series optical data transmission devices enable data to be transmitted quickly and reliably between an aligned pair of units over long distances. Typical uses are on overhead and stacker cranes, automated storage and retrieval systems (AS/RS) and transfer cars for non-contact bi-directional communication from the vehicle to the control unit. The use of modulated light as the transfer method means that these transceivers do not incur physical wear like trailing cables and slip rings nor do they require recalibration like radio systems.

    • Storage and Warehousing
    • Overhead and Gantry Cranes
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Semiconductor
  • HOKUYO CWF/EWF SERIES

    Category: Optical Data Transmission

    The CWF/EWF Series are small, lightweight, economical type optical data transmission devices that enable data to be transmitted quickly and reliably between an aligned pair of units over mid- range distances. Typical uses are on overhead and stacker cranes, automated storage and retrieval systems (AS/RS) and transfer cars for non-contact bi-directional communication from the vehicle to the control unit. The use of modulated light as the transfer method means that these transceivers do not incur physical wear like trailing cables and slip rings nor do they require recalibration like radio systems.

    • Storage and Warehousing
    • Overhead and Gantry Cranes
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Semiconductor
  • HOKUYO DC-JA – Small Size Total Counter

    Category: Counter
    • White LCD display(LED back-light) for better visibility
    • 7 digits(7-segment, zero-suppress)
    • Reset key-lock provides 
  • HOKUYO DC-JB/JC – Various Function Digital Counter

    Category: Counter
    • Excellent visibility
    • 6 digit preset counter with built in 12 digits total counter
    • Pre-scale function is provided
    • Multiple functions
  • HOKUYO DM SERIES

    Category: Optical Data Transmission

    The DM Series are half-duplex parallel-type and full-duplex serial-type optical data transmission devices that enable data to be transmitted quickly and reliably between an aligned pair of units over short distances. Typical uses are on automated guided vehicles (AGV), rail-guided vehicles (RGV) and overhead transports (OHT) for providing a wireless link between the vehicle and a fixed docking station. Special models equipped with a 25-pin D-sub connector provide SEMI E84 compliance for interfacing between semiconductor process equipment and automated material handling systems (AMHS). Through a pulse-modulated light beam these transceivers can send 4, 8, 16-bit or serial signals simultaneously in both directions from the active and passive sides depending on the application requirements and model used.

    • Storage and Warehousing
    • Overhead and Gantry Cranes
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Semiconductor
    • Industrial Vehicles(AGVs)
  • HOKUYO HSA-70

    Category: Ultrasonic Sensor

    This sensor has applied “principle of echo” that sound reflects in a thing and comes on the contrary. It measures transmission time from projecting ultrasonic to receiving it and distance is measured.

    • It is possible to measure even if dew drops on transmission surface.
    • It corresponds to chemical and collosion-proof by united resin mold.
    • It is easy connection system with water-proof connector.
  • HOKUYO KAD-300

    Category: Crane Collision Avoidance

    The KAD-300 crane collision avoidance sensor is used to reduce the potential for collisions between overhead cranes, monorail systems, and fixed objects or obstructions located in the crane runway area. Built with a rugged metal housing, this device offers three separate outputs for distance settings up to 100 feet and is used to initiate slow-down and stop commands. In addition to the three outputs, the KAD-300 is equipped with a trouble (FAULT) output that will energize in the event a failure occurs with the internal emitter and receiver components.

    A typical application would have the sensor unit mounted on the crane bridge and a reflective target on the opposing end wall or crane. With limited hardware, the KAD-300 allows for an ease of installation and maintenance. The flexibility of this device will allow you to configure it to variable frequency drives and stepped controls.

    • Storage and Warehousing
    • Overhead and Gantry Cranes
    • Metal and Steel
    • Material Handling and Packaging
    • Automotive and Aerospace
  • HOKUYO LAV-10/11 SERIES

    Category: Hot Metal Detectors

    The Hokuyo LAV series is a laser-based optical fiber type hot metal detector (HMD) that contains a separately housed emitter and receiver, heat-resistant fiber cables and heavy-duty sensor heads. Equipped with high-powered laser diodes, this device operates effectively in high-temperature harsh production areas where dust, steam and vapors are present. With accurate long-range transmission, this through-beam system operates effectively in mill environments by detecting passing material on a process line that interrupts the infrared laser beam.

    • Metal and Steel
  • HOKUYO MBX SERIES

    Category: Hot Metal Detectors

    The Hokuyo MBX series is a non-contact hot metal detector (HMD) that uses microwave transmission for detecting hot steel. This system integrates a control unit, stainless waveguide and remotely mounted antenna stand. For the most severe applications where dust, smoke, vapors, high temperatures, induced noise or intense ambient light are present, this non-invasive sensing system is ideal for reliable detection of hot material in a continuous casting line, pipe or rolling mill.

    • Metal and Steel
  • HOKUYO OPEN-NETWORK SERIES

    Category: Optical Data Transmission

    The open-network type optical data transmission devices enable data to be transmitted quickly and reliably via Ethernet, CC-Link or DeviceNet between an aligned pair of units over various distances. Typical uses are on stacker cranes, automated storage and retrieval systems (AS/RS), AGVs and transfer cars for non-contact communication from the vehicle to the control unit. The use of modulated light as the transfer method means that these transceivers do not incur physical wear like trailing cables and slip rings nor do they require recalibration like radio systems.

    • Storage and Warehousing
    • Overhead and Gantry Cranes
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Semiconductor
  • HOKUYO OPTICAL REMOTE CONTROLS

    Category: Optical Data Transmission

    The BRS series of optical remote control technology is suitable for many applications requiring simple data transmission between an operator and machine. Featuring small hand-held transmitters and compact receiver units, these models provide reliable communication for distances up to 10 meters. These systems allow an operator to transmit a signal to one specific receiver or several receivers through designated codes. With the flexibility of one transmitter communicating to multiple receiver units, an operator can reduce the number of spare transmitters needed and increase the overall efficiency of the remote control system.

    • Storage and Warehousing
    • Material Handling and packaging
    • Automotive and Aerospace
    • Semiconductor
  • HOKUYO PFX – Built In Amplifier Miniature Ultra Slim Photoelectric Sensor (Front Sensing)

    Category: Photoelectric Sensor
    • Flat type design: 3.5mm thickness to serve space saving purpose.
    • High-speed response time: 0.5msec.
    • Water-proof IP67 structure.
  • HOKUYO PFX2 – Built In Amplifier Miniature Ultra Slim Photoelectric Sensor (Side Sensing)

    Category: Photoelectric Sensor
    • Flat type design: 3.5mm thickness to serve space saving purpose.
    • High-speed response time: 0.5msec.
    • Water-proof IP67 structure.
  • HOKUYO PH-DX/WX SERIES

    Category: Hot Metal Detectors

    The Hokuyo PX-DX/WX series is an economical through-beam type hot metal detector (HMD) that is used where lower ambient temperature areas are present within the steel manufacturing process. This model consists of a separate emitter and receiver equipped in compact self-contained housings. With accurate long-range transmission, this through-beam sensor operates effectively in mill environments by detecting passing material on a process line that interrupts the modulated light beam.

    • Metal and Steel
  • HOKUYO PHV-10 SERIES

    Category: Hot Metal Detectors

    The PHV-10 series is an LED-based optical fiber type hot metal detector (HMD) that contains a separately housed emitter and receiver, heat-resistant fiber cables and heavy-duty sensor heads. With accurate long-range transmission, this through-beam system operates effectively in mill environments by detecting passing material on a process line that interrupts the modulated light beam.

    • Metal and Steel
  • HOKUYO PRV-10 SERIES

    Category: Hot Metal Detectors

    The PRV-10 series Hot Metal Detector (HMD) is an electronic controller that includes the infrared detection cell, amplifier and electronic outputs in an aluminum die-cast housing. To accommodate variation in product temperature and background radiation, three levels of infrared thresholds are selectable with an internal switch and sensitivity adjustment knob. Combined with flexible stainless steel fiber cables and interchangeable sensor heads, this radiant-heat detection system can be standardized throughout the mill.

    • Metal and Steel
  • HOKUYO RSC-30LN

    Category: Crane Collision Avoidance

    The RSC-30LN scanning laser rangefinder is an industrial sensor used for area obstacle detection and collision prevention for high-bay to lower bay crane applications. With a wide scan angle and detection range, this scanner will reduce the potential for collisions between overhead cranes and fixed objects or obstructions located in the crane runway area. With area-setting software, this device can be easily configured to any application for programming up to three detection output zones.

    • Storage and Warehousing
    • Overhead and Gantry Cranes
    • Metal and Steel
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Ports and terminals
  • HOKUYO UAM-05LP

    Category: Safety Laser Scanners

    The UAM-05LP is a protective scanning device used for zone guarding near production equipment areas and monitoring the travel path of moving vehicles. Using the TOF (Time of Flight) operating principle for distance measurement, the scanner will calculate the time during which a pulse-emitted beam is reflected back from any detected object within a 270º scanning angle. Any object or person entering the configured warning and protection zones will initiate an output for stopping a machine or automated guided vehicle. The safety laser scanner allows users to easily configure simple or complex protection and/or warning zones to meet the application requirements. To maximize safety in a compact size, the UAM is an ideal solution for preventing a potentially unsafe situation in many industrial sectors. The UAM-05LP is also equipped with an Ethernet interface for obtaining distance data and intensity output values.

    • Industrial Vehicles(AGVs)
    • Storage and Warehousing
    • Autonomous Robotics
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Metal and Steel
      Download Catalogue: UAM-05LP_Product_Catalog
  • HS35F

    Category: Incremental
    • Robust industrial encoder up to IP 67 protection
    • Shock resistant up to 200 g’s
    • Insulating insert to prevent high shaft currents from damaging bearings
    • Wide range voltage supply 4.75…30 VDC
    • Precision ≤60 arc-seconds for perfect process control
    • Max. 80000 pulses per revolution
  • Hygienic – RTD temperature sensor

    Category:
    • Can be individually configured to your requirements
    • Optionally available with touch screen
    • Customized immersion depth 20 … 3000 mm
    • 4 … 20 mA, HART or Pt100 output signal
    • Convenient installation and easy operation
  • IF08.D02S-F16.UA1Z.7WLU

    Category: IF 08
    • 0 … 2 mm
    • voltage output
    • Time range 99999 h 59 min / 99999.99 h
    • flylead connector PUR M8, L=200 mm
    • 10 … 60 °C
    • IP 67
  • IFBR 06N13T1/S14L-9

    Category: Inductive Sensor-Hygienic
    • 3 mm
    • PNP make function (NO)
    • connector M12
    • -40 … 80 °C
    • IP 68/69K & proTect+
  • IFFM 08P17A3/O1S35L

    Category: IFFM 08-Miniature
    • 2 mm
    • NPN make function (NO)
    • connector M8
    • -25 … 75 °C
    • IP 67
  • IFFM 12N17A3/S05L

    Category: IFFM 12-Standard Sensor
    • 4 mm
    • NPN make function (NO)
    • connector M5
    • -25 … 75 °C
    • IP 67
  • IFFM 20P1501/S35L

    Category: IFFM 20-Square Type
    • 5 mm
    • PNP make function (NO)
    • connector M8
    • -25 … 75 °C
    • IP 67
  • IFRD 06N17A1/S35L

    Category: IFRD 06-Sturdy Sensor
    • 2 mm
    • NPN make function (NO)
    • connector M8
    • -25 … 75 °C
    • IP 68/67 (sensing face/sensor)
  • IFRM 18N17M1/PL

    Category: IFRM 18-Large Sensing
    • 10 mm
    • NPN make function (NO)
    • cable PUR 3 x 0,25, 2 m
    • -40 … 80 °C
    • IP 67
  • IFRR 12N13T1/L-9

    Category: IFRR 12-Wash Down Sensor
    • 6 mm
    • NPN make function (NO)
    • cable PVC, 2 m
    • -40 … 80 °C
    • IP 68/69K & proTect+
  • IHRM 12P1501

    Category: Hall & Speed SensorProximity Sensor
    • cable FEP, 2 m
    • -40 … 120 °C
  • IHRM 12P1501

    Category: Hall & Speed SensorProximity Sensor
    • cable FEP, 2 m
    • -40 … 120 °C
  • IHRM 12P1501

    Category: Hall & Speed SensorProximity Sensor
    • cable FEP, 2 m
    • -40 … 120 °C
  • Inductive distance measuring sensors

    Category:
    • distance measuring
    • 0 … 3 mm
    • push-pull / IO-Link
    • IO-Link
    • connector M8
    • -25 … 75 °C
    • IP 67
  • Industrial – RTD temperature sensor

    Category:
    • User-configurable according to individual requirements
    • Optional with touch display
    • Immersion depth 20 … 3000 mm
    • 4 … 20 mA, HART or Pt100 output
    • Convenient installation and reliable operation
  • IPRM 12I9504/S14

    Category: IPRM 12
    • 0,5 … 1,5 mm
    • current output
    • connector M12
    • 60 °C
    • IP 67
  • IR06.D03L-F46.GP1I.7SL

    Category: IR 06 IO-Link
    • distance measuring
    • 0 … 3 mm
    • push-pull / IO-Link
    • IO-Link
    • connector M8
    • -25 … 75 °C
    • IP 67
  • IR06.D03L-Q40.UA1Z.7SCV

    Category: IR 06-Linearized
    • 0 … 3 mm
    • voltage output
    • cable, 2 m
    • -25 … 75 °C
    • IP 67
  • IR06.D03L-Q46.UA1T.7SL

    Category: IR 06-Miniature
    • 0 … 3 mm
    • voltage output
    • Teach-in
    • connector M8
    • -25 … 75 °C
    • IP 67
  • IR06.P02F-11119425

    Category: IF06-Factor 1 Sensor
    • 2 mm
    • NPN break function (NC)
    • cable, 2 m
    • -25 … 75 °C
    • IP 67
  • IR12.D04S-F40.UA1Z.7BCV

    Category: IR 12-Standard Sensor
    • 0 … 4 mm
    • voltage output
    • cable, 2 m
    • -25 … 75 °C
    • IP 67
  • IR18.D08F-F60.UA1E.7BO

    Category: IF 18-Factor 1
    • 0 … 8 mm
    • voltage output
    • external Teach-in
    • connector M12
    • -25 … 75 °C
    • IP 67
  • ISI30

    Category: Electronic
    • Impulse counter
    • Adding or subtracting
  • ISI34

    Category: Electronic
    • Time and hour counter
    • Time range 99999 h 59 min / 99999.99 h
  • ITD 4 B10

    Category: Euro Flange
    • Encoder with solid shaft ø11 mm
    • Max. 60 pulses per revolution
    • Optical sensing method
    • Centering alignment ø85 mm, mounting screw hole circle ø100 mm
    • Industrial standard with centering flange
    • TTL or HTL output signals
    • Cable output radial or axial
  • IWRM 18I97T4/S14

    Category: IWRM 18
    • 0 … 8 mm
    • current output
    • connector M12
    • -40 … 70 °C
    • IP 67
  • LBFH

    Category: CleverLevel Level Switches
    • Safe detection of liquids, bulk solids and powders 
    • Short immersion length 
    • Excellent cleanability 
    • Capable of differentiation between foam and liquid 
    • Insensitive to adherent or sticky media 
    • Status indication by bright, multicolor LED 
    • Compact stainless steel housing, protection up to IP69K 
    • Teach-in on site or remote by control wire 
    • Two switching outputs with dedicated switching windows 
    • IO-Link configuration and interface
  • LBFI

    Category: CleverLevel Level Switches
    • Compact and robust stainless steel housing
    • On-site setting with qTeach
    • Two adjustable switching outputs
    • Multicolor LED display of switching statuses
    • Interface IO-Link
  • Level Switch LFFS

    Category: CleverLevel Level Switches
    • Wetted parts in acid-proof, stainless steel and PEEK 
    • Compact, food compatible, hygienic design 
    • Hygienic connections conform to 3-A standards, FDA de- mands and EHEDG guidelines 
    • Precise switching point without calibration 
    • Process temperature -40…200 °C 
    • Measures media with DC-values >1.5 (DC = Dielectric Constant) Data sheet LFFS
    • Not influenced by foam 
    • LED switch indicator 
    • Maintenance free 
    • Suitable for media separation measurement 
    • Configurable by FlexProgrammer 9701 
    • ATEX approval for gas and dust 
    • WHG approval (leakage and overfill)
  • LK18

    Category: Laser Sensor
    • Class 1 laser
    • Small Light spot 0.5mm (range of 100mm)
    • Protection rating IP67
  • LK18-R5 (retroreflective)

    Category: Laser Sensor
    • Class 1 Laser
    • Small Light spot 0.7mm
    • One button teaching
  • LK3

    Category: Laser Sensor
    • Standard Screw hole 25.4mm
    • Visible dual LED makes you easy to know the current operating situation
    • Compact size (W12xH31xD20mm), space saving
  • LRS-DU10 / LRS-DU40

    Category: Laser Sensor
    • OLED Graphic Display
    • 180’Rotating connector
    • NPN and PNP output (NP)
  • LSP

    Category: Floatless
    • Potentiometric Level Transmitter
    • Wetted parts in acid-proof, stainless steel and PEEK
    • Compact, food compatible, hygienic design
    • 3-A approved / FDA and EHEDG compliant
    • Defined empty registration
    • LED level monitor
    • Unaffected by strong adhesive media
    • Configurable measuring range
  • LXG-20M

    Category: Industrial Cameras
    • 2048 × 1088 px
    • ams (CMOSIS) CMV2000 V3
    • 2/3″ CMOS
    • 111 fps
    • Dual Gigabit Ethernet
  • M18 PSD

    Category: Proximity Sensor – Inductive
    • 90 degree wiring, saving space.
    • Large LED indicator, clearly working operation.
    • Surge suppressor and overload protection.
  • MAGRES EAM580-B – EtherCAT

    Category: Integrated Interface -58mmRedundant SensingRobust Series
    • Encoder multiturn / EtherCAT
    • Precise magnetic sensing
    • Resolution max. 30 bit (14 bit ST, 16 bit MT)
    • Angular accuracy up to ±0.15°
    • High protection up to IP 67
    • High resistance to shock and vibrations
    • LED status display
  • MDFK 08 – push-pull

    Category: Incremental
    • Magnetic sensor with magnetic wheel
    • Resolution max. 4096 steps
    • Output signals A 90° B or A 90° B +N
    • Output circuits: push-pull and RS422/li
    • Non-contact, wear-free sensing system
    • High resistance to dirt
    • Narrow mounting design
  • MDFM 20I9424/A270

    Category: Analog Magnectic Rotary
    • current output
    • cable PUR 3 x 0,25, 2 m
    • -40 … 85 °C
    • IP 67/li>
Automation
Mechanical
Scroll to Top
Open chat
Hello 👋
Can we help you?
× How can I help you?