Shop

  • HOKUYO LAV-10/11 SERIES

    Category: Hot Metal Detectors

    The Hokuyo LAV series is a laser-based optical fiber type hot metal detector (HMD) that contains a separately housed emitter and receiver, heat-resistant fiber cables and heavy-duty sensor heads. Equipped with high-powered laser diodes, this device operates effectively in high-temperature harsh production areas where dust, steam and vapors are present. With accurate long-range transmission, this through-beam system operates effectively in mill environments by detecting passing material on a process line that interrupts the infrared laser beam.

    • Metal and Steel
  • Placeholder

    HOKUYO LDA – Digital Type Laser Sensor With External Amplifier

    Category: Uncategorized
    • Visible laser ray for easy allignment
    • High-speed response time, 60µsec
    • 3 kinds of beam can be chosen(Spot, area, line)
    • IP67 for sensor head
  • Placeholder

    HOKUYO LEX – Built In Amplifier Laser Sensor

    Category: Uncategorized
    • Easy to install due to visible laser beam
    • High response time, 0.25msec. or less
    • IP67, water-proof structure
    • Small light spot enable detection of small objects
    • Cost saving
  • HOKUYO MBX SERIES

    Category: Hot Metal Detectors

    The Hokuyo MBX series is a non-contact hot metal detector (HMD) that uses microwave transmission for detecting hot steel. This system integrates a control unit, stainless waveguide and remotely mounted antenna stand. For the most severe applications where dust, smoke, vapors, high temperatures, induced noise or intense ambient light are present, this non-invasive sensing system is ideal for reliable detection of hot material in a continuous casting line, pipe or rolling mill.

    • Metal and Steel
  • HOKUYO OPEN-NETWORK SERIES

    Category: Optical Data Transmission

    The open-network type optical data transmission devices enable data to be transmitted quickly and reliably via Ethernet, CC-Link or DeviceNet between an aligned pair of units over various distances. Typical uses are on stacker cranes, automated storage and retrieval systems (AS/RS), AGVs and transfer cars for non-contact communication from the vehicle to the control unit. The use of modulated light as the transfer method means that these transceivers do not incur physical wear like trailing cables and slip rings nor do they require recalibration like radio systems.

    • Storage and Warehousing
    • Overhead and Gantry Cranes
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Semiconductor
  • HOKUYO OPTICAL REMOTE CONTROLS

    Category: Optical Data Transmission

    The BRS series of optical remote control technology is suitable for many applications requiring simple data transmission between an operator and machine. Featuring small hand-held transmitters and compact receiver units, these models provide reliable communication for distances up to 10 meters. These systems allow an operator to transmit a signal to one specific receiver or several receivers through designated codes. With the flexibility of one transmitter communicating to multiple receiver units, an operator can reduce the number of spare transmitters needed and increase the overall efficiency of the remote control system.

    • Storage and Warehousing
    • Material Handling and packaging
    • Automotive and Aerospace
    • Semiconductor
  • HOKUYO PDF – High Functions Dual Output Digital Fiber Amplifier

    Category: Uncategorized
    • Dual display of Preset value and current light receiving value
    • High Speed 60µsec
    • Automatic Power Control function to maintain constant power light source
    • Remote teach-in function is configurable.
  • HOKUYO PEX – Built In Amplifier Photoelectric Sensor

    Category: Uncategorized
    • Detecting distance is 10m for through-beam type, is 2.6m for retro-reflection type and is 0.5m for diffuse reflection type.
    • Cost saving models
    • Waterproof housing
  • HOKUYO PEX ECO – Eco Friendly Photoelectric Sensor

    Category: Uncategorized
    • Offers low power consumption for greener environment.
    • Extended sensing distance compared to ordinary PEX series.
    • IP 67 & Compact Size
  • HOKUYO PFX – Built In Amplifier Miniature Ultra Slim Photoelectric Sensor (Front Sensing)

    Category: Photoelectric Sensor
    • Flat type design: 3.5mm thickness to serve space saving purpose.
    • High-speed response time: 0.5msec.
    • Water-proof IP67 structure.
  • HOKUYO PFX2 – Built In Amplifier Miniature Ultra Slim Photoelectric Sensor (Side Sensing)

    Category: Photoelectric Sensor
    • Flat type design: 3.5mm thickness to serve space saving purpose.
    • High-speed response time: 0.5msec.
    • Water-proof IP67 structure.
  • HOKUYO PH-DX/WX SERIES

    Category: Hot Metal Detectors

    The Hokuyo PX-DX/WX series is an economical through-beam type hot metal detector (HMD) that is used where lower ambient temperature areas are present within the steel manufacturing process. This model consists of a separate emitter and receiver equipped in compact self-contained housings. With accurate long-range transmission, this through-beam sensor operates effectively in mill environments by detecting passing material on a process line that interrupts the modulated light beam.

    • Metal and Steel
  • HOKUYO PHV-10 SERIES

    Category: Hot Metal Detectors

    The PHV-10 series is an LED-based optical fiber type hot metal detector (HMD) that contains a separately housed emitter and receiver, heat-resistant fiber cables and heavy-duty sensor heads. With accurate long-range transmission, this through-beam system operates effectively in mill environments by detecting passing material on a process line that interrupts the modulated light beam.

    • Metal and Steel
  • HOKUYO PLX – AC/DC Free Power Source Photoelectric Sensor

    Category: Uncategorized
    • Though-beam type 10m, Retro-reflection type(With polarized filter) 4m, Diffuse-reflection type 70cm
    • Free power source, 24 to 240VAC/12 to 110VDC
    • Easy alignment due to visible red LED light source
  • Placeholder

    HOKUYO PNX / AMPLIFIER BUILT-IN SENSOR

    Category: Uncategorized
    • Though-beam type 70m, Retro-reflective type 12m
    • Free power source, 12 to 240 VAC / 24 to 240 VDC
  • HOKUYO PRV-10 SERIES

    Category: Hot Metal Detectors

    The PRV-10 series Hot Metal Detector (HMD) is an electronic controller that includes the infrared detection cell, amplifier and electronic outputs in an aluminum die-cast housing. To accommodate variation in product temperature and background radiation, three levels of infrared thresholds are selectable with an internal switch and sensitivity adjustment knob. Combined with flexible stainless steel fiber cables and interchangeable sensor heads, this radiant-heat detection system can be standardized throughout the mill.

    • Metal and Steel
  • HOKUYO PVF – High Performance Fiber Amplifier

    Category: Uncategorized
    • Response time 250µsec
    • Easy sensitivity adjustment (no screw driver is required)
    • 40ms off delay function
  • HOKUYO RSC-30LN

    Category: Crane Collision Avoidance

    The RSC-30LN scanning laser rangefinder is an industrial sensor used for area obstacle detection and collision prevention for high-bay to lower bay crane applications. With a wide scan angle and detection range, this scanner will reduce the potential for collisions between overhead cranes and fixed objects or obstructions located in the crane runway area. With area-setting software, this device can be easily configured to any application for programming up to three detection output zones.

    • Storage and Warehousing
    • Overhead and Gantry Cranes
    • Metal and Steel
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Ports and terminals
  • HOKUYO UAM-05LP

    Category: Safety Laser Scanners

    The UAM-05LP is a protective scanning device used for zone guarding near production equipment areas and monitoring the travel path of moving vehicles. Using the TOF (Time of Flight) operating principle for distance measurement, the scanner will calculate the time during which a pulse-emitted beam is reflected back from any detected object within a 270º scanning angle. Any object or person entering the configured warning and protection zones will initiate an output for stopping a machine or automated guided vehicle. The safety laser scanner allows users to easily configure simple or complex protection and/or warning zones to meet the application requirements. To maximize safety in a compact size, the UAM is an ideal solution for preventing a potentially unsafe situation in many industrial sectors. The UAM-05LP is also equipped with an Ethernet interface for obtaining distance data and intensity output values.

    • Industrial Vehicles(AGVs)
    • Storage and Warehousing
    • Autonomous Robotics
    • Material Handling and Packaging
    • Automotive and Aerospace
    • Metal and Steel
      Download Catalogue: UAM-05LP_Product_Catalog
  • HPS Series for High Pressure Steam Service in Corrugators

    Category: Rotating Union / Rotary Joint
    • Monoflow and duoflow design
    • Self-supported rotating union
    • Seals and bearings made of special Carbon Graphite
    • Convex seal ring better suited to handle mechanical and thermal shock
    • External mechanism to adjust siphon pipe through end cap
    • Nickel-plated front and rear end cap
    • Nickel-plated ductile iron housing
    • Stainless steel spring
    • Heavy duty steel rotor design
    • Dual bearings for extended service life
  • HS35F

    Category: Incremental
    • Robust industrial encoder up to IP 67 protection
    • Shock resistant up to 200 g’s
    • Insulating insert to prevent high shaft currents from damaging bearings
    • Wide range voltage supply 4.75…30 VDC
    • Precision ≤60 arc-seconds for perfect process control
    • Max. 80000 pulses per revolution
  • Hybrid-Multi-Passage Series up to 10-Passages for various Media

    Category: Rotating Union / Rotary Joint
    • Independent channels for various applications, e.g. clamping/ unclamping, tool clamping, cooling and work piece sensoring
    • Combination of various sealing technologies for compact design, high pressures for hydraulic and coolant applications and high flow
    • Special balanced sealing technologies for low temperatures and long life
    • Various installation options for easy and fast installation through media plug-and-socket connection (DEUBLIN tubes)
  • Hygienic – RTD temperature sensor

    Category:
    • Can be individually configured to your requirements
    • Optionally available with touch screen
    • Customized immersion depth 20 … 3000 mm
    • 4 … 20 mA, HART or Pt100 output signal
    • Convenient installation and easy operation
  • IF08.D02S-F16.UA1Z.7WLU

    Category: IF 08
    • 0 … 2 mm
    • voltage output
    • Time range 99999 h 59 min / 99999.99 h
    • flylead connector PUR M8, L=200 mm
    • 10 … 60 °C
    • IP 67
  • IFBR 06N13T1/S14L-9

    Category: Inductive Sensor-Hygienic
    • 3 mm
    • PNP make function (NO)
    • connector M12
    • -40 … 80 °C
    • IP 68/69K & proTect+
  • IFFM 08P17A3/O1S35L

    Category: IFFM 08-Miniature
    • 2 mm
    • NPN make function (NO)
    • connector M8
    • -25 … 75 °C
    • IP 67
  • IFFM 12N17A3/S05L

    Category: IFFM 12-Standard Sensor
    • 4 mm
    • NPN make function (NO)
    • connector M5
    • -25 … 75 °C
    • IP 67
  • IFFM 20P1501/S35L

    Category: IFFM 20-Square Type
    • 5 mm
    • PNP make function (NO)
    • connector M8
    • -25 … 75 °C
    • IP 67
  • IFRD 06N17A1/S35L

    Category: IFRD 06-Sturdy Sensor
    • 2 mm
    • NPN make function (NO)
    • connector M8
    • -25 … 75 °C
    • IP 68/67 (sensing face/sensor)
  • IFRM 18N17M1/PL

    Category: IFRM 18-Large Sensing
    • 10 mm
    • NPN make function (NO)
    • cable PUR 3 x 0,25, 2 m
    • -40 … 80 °C
    • IP 67
  • IFRR 12N13T1/L-9

    Category: IFRR 12-Wash Down Sensor
    • 6 mm
    • NPN make function (NO)
    • cable PVC, 2 m
    • -40 … 80 °C
    • IP 68/69K & proTect+
  • IHRM 12P1501

    Category: Hall & Speed SensorProximity Sensor
    • cable FEP, 2 m
    • -40 … 120 °C
  • IHRM 12P1501

    Category: Hall & Speed SensorProximity Sensor
    • cable FEP, 2 m
    • -40 … 120 °C
  • IHRM 12P1501

    Category: Hall & Speed SensorProximity Sensor
    • cable FEP, 2 m
    • -40 … 120 °C
  • Inductive distance measuring sensors

    Category:
    • distance measuring
    • 0 … 3 mm
    • push-pull / IO-Link
    • IO-Link
    • connector M8
    • -25 … 75 °C
    • IP 67
  • Industrial – RTD temperature sensor

    Category:
    • User-configurable according to individual requirements
    • Optional with touch display
    • Immersion depth 20 … 3000 mm
    • 4 … 20 mA, HART or Pt100 output
    • Convenient installation and reliable operation
  • IPRM 12I9504/S14

    Category: IPRM 12
    • 0,5 … 1,5 mm
    • current output
    • connector M12
    • 60 °C
    • IP 67
  • IR06.D03L-F46.GP1I.7SL

    Category: IR 06 IO-Link
    • distance measuring
    • 0 … 3 mm
    • push-pull / IO-Link
    • IO-Link
    • connector M8
    • -25 … 75 °C
    • IP 67
  • IR06.D03L-Q40.UA1Z.7SCV

    Category: IR 06-Linearized
    • 0 … 3 mm
    • voltage output
    • cable, 2 m
    • -25 … 75 °C
    • IP 67
  • IR06.D03L-Q46.UA1T.7SL

    Category: IR 06-Miniature
    • 0 … 3 mm
    • voltage output
    • Teach-in
    • connector M8
    • -25 … 75 °C
    • IP 67
  • IR06.P02F-11119425

    Category: IF06-Factor 1 Sensor
    • 2 mm
    • NPN break function (NC)
    • cable, 2 m
    • -25 … 75 °C
    • IP 67
  • IR12.D04S-F40.UA1Z.7BCV

    Category: IR 12-Standard Sensor
    • 0 … 4 mm
    • voltage output
    • cable, 2 m
    • -25 … 75 °C
    • IP 67
  • IR18.D08F-F60.UA1E.7BO

    Category: IF 18-Factor 1
    • 0 … 8 mm
    • voltage output
    • external Teach-in
    • connector M12
    • -25 … 75 °C
    • IP 67
  • ISI30

    Category: Electronic
    • Impulse counter
    • Adding or subtracting
  • ISI34

    Category: Electronic
    • Time and hour counter
    • Time range 99999 h 59 min / 99999.99 h
  • ITD 4 B10

    Category: Euro Flange
    • Encoder with solid shaft ø11 mm
    • Max. 60 pulses per revolution
    • Optical sensing method
    • Centering alignment ø85 mm, mounting screw hole circle ø100 mm
    • Industrial standard with centering flange
    • TTL or HTL output signals
    • Cable output radial or axial
  • IWRM 18I97T4/S14

    Category: IWRM 18
    • 0 … 8 mm
    • current output
    • connector M12
    • -40 … 70 °C
    • IP 67
  • Ladle Turret Union

    Category: Rotating Union / Rotary Joint
    • Ladle turrets require complex, heavy-duty multi-passage unions that support the hydraulic lifting of the ladle for each pour of molten metal. Deublin Ladle Turret Unions accommodate multiple media including hydraulic oil, argon, air and water.
    • Typical number of ports: up to 26.
  • LBFH

    Category: CleverLevel Level Switches
    • Safe detection of liquids, bulk solids and powders 
    • Short immersion length 
    • Excellent cleanability 
    • Capable of differentiation between foam and liquid 
    • Insensitive to adherent or sticky media 
    • Status indication by bright, multicolor LED 
    • Compact stainless steel housing, protection up to IP69K 
    • Teach-in on site or remote by control wire 
    • Two switching outputs with dedicated switching windows 
    • IO-Link configuration and interface
  • LBFI

    Category: CleverLevel Level Switches
    • Compact and robust stainless steel housing
    • On-site setting with qTeach
    • Two adjustable switching outputs
    • Multicolor LED display of switching statuses
    • Interface IO-Link
  • Level Switch LFFS

    Category: CleverLevel Level Switches
    • Wetted parts in acid-proof, stainless steel and PEEK 
    • Compact, food compatible, hygienic design 
    • Hygienic connections conform to 3-A standards, FDA de- mands and EHEDG guidelines 
    • Precise switching point without calibration 
    • Process temperature -40…200 °C 
    • Measures media with DC-values >1.5 (DC = Dielectric Constant) Data sheet LFFS
    • Not influenced by foam 
    • LED switch indicator 
    • Maintenance free 
    • Suitable for media separation measurement 
    • Configurable by FlexProgrammer 9701 
    • ATEX approval for gas and dust 
    • WHG approval (leakage and overfill)
  • LK18

    Category: Laser Sensor
    • Class 1 laser
    • Small Light spot 0.5mm (range of 100mm)
    • Protection rating IP67
  • LK18-R5 (retroreflective)

    Category: Laser Sensor
    • Class 1 Laser
    • Small Light spot 0.7mm
    • One button teaching
  • LK3

    Category: Laser Sensor
    • Standard Screw hole 25.4mm
    • Visible dual LED makes you easy to know the current operating situation
    • Compact size (W12xH31xD20mm), space saving
  • Low Speed Air, Hydraulic, Brake Fluid Unions

    Category: Rotating Union / Rotary Joint
    • Monoflow design
    • Self-supported rotating union
    • Steel rotor nickel-plated
    • Special bearing
    • Aluminum housing
  • LRS-DU10 / LRS-DU40

    Category: Laser Sensor
    • OLED Graphic Display
    • 180’Rotating connector
    • NPN and PNP output (NP)
  • LS MECAPION H40 SERIES – Outer: Ø40, Shaft: Ø8

    Category: Uncategorized
    • Various resolution, 10 – 3600 P/R (29 class)
    • Wide ranging power voltage

    ACCESSORIES

    • Plastic coupling (Ø8, Ø6)
    • Helical coupling (Ø6-Ø6, Ø8-Ø8, Ø6-Ø10, Ø8-Ø10)
    • Disk coupling (Ø6-Ø6, Ø8-Ø8, Ø6-Ø10, Ø8-Ø10)
  • Placeholder

    LS MECAPION S30 SERIES – Outer: Ø30, Shaft: Ø4

    Category: Uncategorized
    • Small size and various resolution, 200 – 2500 P/R (5 class)
    • Wide ranging power voltage
  • LS MECAPION S40 SERIES – Outer: Ø40, Shaft: Ø6

    Category: Uncategorized
    • Various resolution, 10-3600 P/R (29 class)
    • Wide ranging power voltage
  • LS MECAPION S48 SERIES – Outer: Ø48, Shaft: Ø8

    Category: Uncategorized
    • Various resolution, 10 – 6000 P/R (31 class)
    • Wide ranging power voltage
  • LSP

    Category: Floatless
    • Potentiometric Level Transmitter
    • Wetted parts in acid-proof, stainless steel and PEEK
    • Compact, food compatible, hygienic design
    • 3-A approved / FDA and EHEDG compliant
    • Defined empty registration
    • LED level monitor
    • Unaffected by strong adhesive media
    • Configurable measuring range
  • LXG-20M

    Category: Industrial Cameras
    • 2048 × 1088 px
    • ams (CMOSIS) CMV2000 V3
    • 2/3″ CMOS
    • 111 fps
    • Dual Gigabit Ethernet
  • M18 PSD

    Category: Proximity Sensor – Inductive
    • 90 degree wiring, saving space.
    • Large LED indicator, clearly working operation.
    • Surge suppressor and overload protection.
  • MAGRES EAM580-B – EtherCAT

    Category: Integrated Interface -58mmRedundant SensingRobust Series
    • Encoder multiturn / EtherCAT
    • Precise magnetic sensing
    • Resolution max. 30 bit (14 bit ST, 16 bit MT)
    • Angular accuracy up to ±0.15°
    • High protection up to IP 67
    • High resistance to shock and vibrations
    • LED status display
  • MDFK 08 – push-pull

    Category: Incremental
    • Magnetic sensor with magnetic wheel
    • Resolution max. 4096 steps
    • Output signals A 90° B or A 90° B +N
    • Output circuits: push-pull and RS422/li
    • Non-contact, wear-free sensing system
    • High resistance to dirt
    • Narrow mounting design
  • MDFM 20I9424/A270

    Category: Analog Magnectic Rotary
    • current output
    • cable PUR 3 x 0,25, 2 m
    • -40 … 85 °C
    • IP 67/li>
  • ME102

    Category: Mechanical
    • Preset counter with one preset
    • Meter counter
    • Subtracting
    • Display 4-digits
    • With reset button
    • Surface mount housing
  • Metal Housing U-shape Sensor (SU18-NP)

    Category: Uncategorized
    • Robust metal casing.
    • High Speed Response, On: 1ms/Off: 1ms.
    • Wide Vane, 18mm.
    • Better prevention of outside light 5,000 lux max.
  • Metal Housing U-shape Sensor (SU18-NP)

    Category: Photoelectric Sensor
    • Robust metal casing.
    • High Speed Response, On: 1ms/Off: 1ms.
    • Wide Vane, 18mm.
    • Better prevention of outside light 5,000 lux max.
  • MICRO DETECTORS MICRO DETECTORS FC7 LABEL SENSOR

    Category: Label Sensor

    Ultrasonic fork sensors for label detection on transparent surfaces. Dynamic Teach- in system. Width slit detection 3 mm; maximum switching frequency 1,500 Hz.

  • MICRO DETECTORS MICRO DETECTORS FC8 ULTRASONIC LABEL SENSOR

    Category: Label Sensor

    For object or label detection; 2 mm to 180 mm width slit detection; 30 mm to 120 mm depth slit detection; red, infrared and laser emission; adjustable.

  • MIL10

    Category: Linear Magnectic
    • Sensor head with magnetic tape
    • Robust magnetic sensing method
    • Output signals A 90° B with index signal
    • Output circuits: HTL/push-pull and TTL/RS422
    • Resolution up to 5 µm (4-times evaluation)
    • Non-contact, wear-free sensing system
    • High resistance to dirt and vibrations
  • Model 1005-113-063 & Model 1005-113-110

    Category: Rotating Union / Rotary Joint

    This is a small union designed for minimum water flow where space is a problem. The seals are Carbon Graphite-to-Stainless Steel. It has the same dimensions as Model 1005-020-038

  • Model 22 Car Wash Union

    Category: Rotating Union / Rotary Joint
    • Monoflow design
    • Self-supported rotating union
    • Radial housing connection
    • Seal combination: Silicon Carbide/Silicon Carbide
    • Stainless steel housing and rotor
  • Model 468-250 Flanged Rotor

    Category: Rotating Union / Rotary Joint
      This 3-passage union was designed to cool and activate clutches and brakes. The (2) 3/8″ water passages supply and return water for cooling. The 1/4″ capacity air union is tandem mounted to prevent interpassage leakage between the air and water passages. Contact Deublin Engineering Department for complete specifications.
  • Model 927 High Pressure / Low Torque Water Union

    Category: Rotating Union / Rotary Joint
        • Monoflow design
        • Self-supported rotating union
        • Axial housing connection
        • Balanced mechanical seal
        • Seal combination: Tungsten Carbide/Tungsten Carbide
        • Slinger and vents protect bearings
        • Low torque design
        • Stainless steel housing and rotor
  • Model 981-300 2″-12 UN R.H. Rotor Threads

    Category: Rotating Union / Rotary Joint

    This 2-passage union was designed to cool and actuate Drum Brakes on Oil Rigs. It has a 1″ water and 1/2″ air passage. The water passage has a cartridge seal that can be repaired on the machine. The 981-300 union can also be used on many other Air/Hydraulic applications. Contact Deublin Engineering Department for complete specifications.

  • Multi-Channel High Speed Unions (1000+ RPM) for DDRT Applications Requiring Various Media

    Category: Rotating Union / Rotary Joint
    • 3-8 Passages for Various Media
    • Applications include clamping and unclamping, work piece or tool sensing, air cleaning, and spindle cooling
    • Minimized axial length
    • No external lubrication required for air seals
    • Balanced mechanical seals in all passages for low torque and long life even with high speeds and pressures
    • Closed seals provide continuous containment of media with no by-pass leakage
    • Dual precision ball bearings for smooth operation
  • MY-COM A100/200

    Category: All Mechanical
    • break function (NC) mechanical
    • cable, 2 m
    • -20 … 75 °C
    • IP 50
  • MY-COM D250/200

    Category: For Lateral ApproachRugged
    • break function (NC) mechanical
    • cable, 2 m
    • -20 … 75 °C
    • IP 67
  • MY-COM G75N/200/L

    Category: With Amplifier
    • NPN make function (NO)
    • cable, 2 m
    • -20 … 75 °C
    • IP 50
  • MZCK 03N1011

    Category: Cylinder Sensor
    • magneto-resistive
    • NPN
    • cable PUR 3 x 0,08, 2,5 m
    • -40 … 70 °C
    • IP 67
  • N Series Steam and Hot Oil Unions

    Category: Rotating Union / Rotary Joint
    • Monoflow design: N10
    • Monoflow and duoflow design: N12
    • Self-supported rotating union
    • Large carbon graphite bearing
    • Pressurized spherical carbon graphite seal
    • Cast iron housing
    • Stainless steel rotor

    Specification

    Maximum Hot Oil Temperature 450°F
  • NE210

    Category: Electronic
    • Preset counter with one preset
    • Display 5-digits
    • Operating mode, start count, scaling factor programmable
    • Connection: Incremental encoder or digital sensors
    • Time meter with four time ranges
    • Time relay with operation and release delay
    • Programmable as a time counter
  • NEMICON 18S

    Category: Uncategorized
    • Miniature size OD18mm
    • High performance, Up to 1600 resolution
    • Shaft type / Modular type
  • Placeholder

    NEMICON 38H

    Category: Uncategorized
    • Compact Size OD38mm
    • High Performance, Up to 4096 resolution
    • Shaft Type / Modular Type / Hollow Shaft Type
  • NEMICON 38S

    Category: Uncategorized
    • Miniature size OD38mm
    • High performance, Up to 4096 resolution
    • Shaft type / Modular type / Hollow shaft type
  • Placeholder

    NEMICON ASS

    Category: Uncategorized
    • Rugged Absolute Type
    • 10mm Dia Shaft for Very Rugged Structure Application
    • Dust-Proof & Water-Proof (IP 64)
  • NEMICON HES

    Category: Uncategorized
    • Best Seller Hollow Shaft Encoder
    • Wide Variation of outputs (6) and Resolution (30-3600 P/R)
  • NEMICON OEW-2

    Category: Uncategorized
    • Advance Small Model
    • Wide Variation of outputs (6) and resolution (30-3600 P/R)
  • Placeholder

    NEMICON OPN

    Category: Uncategorized
    • Heavy Duty Model
    • Easy Mounting with Flange Attached
  • NEMICON OVW-2

    Category: Uncategorized
    • Economical Model
    • Practical length Reduction from 28mm to 30mm
  • NIDEX PUSH BUTTON

    Category: Push Button

     

    • signal indicator
    • pushbutton switch

     

  • NIDEX SWITCHING POWER SUPPLY

    Category: Switching Power Supply

    NiDEX Swithching Power Supply – Economic and Realible

    • Universal AC input/Full range
    • Protections: Short circuit / Overload / Over voltage / Over temperature
    • Cooling by free air convection
    • 100% full load burn-in test
    • Many types available
  • O200.ER-11210570

    Category: Miniature Photo Sensor
    • receiver
    • through beam sensor
    • 5 m
    • push-pull
    • Teach-in: remote / 1-Step Teach-in
    • threaded sleeves M3 (stainless steel)
    • cable 4 pin, 2 m
    • -25 … 50 °C
    • IP 67
  • O200.GP-11210521

    Category: Photo Sensor With IO-Link
    • background suppression
    • 20 … 120 mm
    • pulsed PinPoint LED
    • push-pull
    • Teach-in and IO-Link
    • sleeve smooth (stainless steel)
    • cable 4 pin, 2 m
    • -25 … 50 °C
    • IP 67
  • O300.DI-GM1J.72CU

    Category: O300 Distance Sensor
    • distance measuring
    • 30 … 300 mm
    • pulsed infrared diode
    • push-pull
    • Teach-in and IO-Link
    • cable 4 pin, 2 m
    • -25 … 60 °C
    • IP 67
  • O300.GL-GW1J.72CU

    Category: Laser Type
    • background suppression
    • 30 … 250 mm
    • pulsed red laser diode
    • push-pull
    • Teach-in and IO-Link
    • cable 4 pin, 2 m
    • -10 … 60 °C
    • IP 67
  • O300.GR-11110414

    Category: Standard Sensor
    • background suppression
    • 30 … 300 mm
    • pulsed red LED
    • push-pull
    • qTeach
    • connector M8 4 pin
    • -25 … 60 °C
    • IP 67
  • O300.SP.T-GW1J.72CU

    Category: Transparent Detection
    • light barrier
    • 30 … 300 mm
    • pulsed PinPoint LED
    • push-pull
    • Teach-in and IO-Link
    • cable 4 pin, 2 m
    • -25 … 60 °C
    • IP 67
Automation
Mechanical
Scroll to Top
Open chat
Hello 👋
Can we help you?
× How can I help you?